Log in

View Full Version : Reply to Robin


robingarr324
October 15th, 2003, 04:51 PM
I try to keep the bit rate at 128 or higher. I use music match to convert
bitrate.
I think when I downloaded cdex I had to download a codex encoder. I can't
remember for sure. I haven't had too many problems with xatshow. I have
used d/l songs and songs I converted from cd's. I only use mp3's because
wav's
take up too much space.

robin

thehamguy1
October 15th, 2003, 07:57 PM
Thanks Robin. I downloaded CDex and tried several variations of
codex, bitrate, stereo vs "jstereo", etc. but haven't found the right
one yet. Xatshow either says its not a recognized format or reports
the wrong duration (ranging from a third of the actual # of minutes,
to over 35,000 minutes!). What codex and other settings--bitrate,
MP1/2/2.5, etc., do you have luck with?

> I have used CDex without a problem.
> http://cdexos.sourceforge.net/
>
> Hope it works for you.
>
> robin
>

seendbl
October 15th, 2003, 09:45 PM
with CDEX, do a convert to another format and then convert that file to mp3

robin <robin.l.garrison@ > wrote:I try to keep the bit rate at 128 or higher. I use music match to convert
bitrate.
I think when I downloaded cdex I had to download a codex encoder. I can't
remember for sure. I haven't had too many problems with xatshow. I have
used d/l songs and songs I converted from cd's. I only use mp3's because
wav's
take up too much space.

robin

thehamguy1
October 16th, 2003, 04:30 AM
Thanks for the tip, I'll give it a try! It's a bit of a trip around
the barn but worth it to save the space, .mp3 format versus .wav.

> with CDEX, do a convert to another format and then convert that
file to mp3
>
> robin <robin.l.garrison@ > wrote:I try to keep the bit rate at
128 or higher. I use music match to convert
> bitrate.
> I think when I downloaded cdex I had to download a codex encoder.
I can't
> remember for sure. I haven't had too many problems with xatshow.
I have
> used d/l songs and songs I converted from cd's. I only use mp3's
because
> wav's
> take up too much space.
>
> robin
>

thehamguy1
October 16th, 2003, 07:17 AM
Finally got the right combo of codex and program settings. Your tip
helped. Also, I had a later version of the lame_enc.dll codex from
other experiments so I substituted it (V1.32, engine 3.93 MMX). When
I convert a WAV file to MPEG I, 128 kbps min. bitrate, auto output
sample rate, I get output Xatshow likes. Happy camper again.

Lee

> with CDEX, do a convert to another format and then convert that
file to mp3
>
> robin <robin.l.garrison@ > wrote:I try to keep the bit rate at
128 or higher. I use music match to convert
> bitrate.
> I think when I downloaded cdex I had to download a codex encoder.
I can't
> remember for sure. I haven't had too many problems with xatshow.
I have
> used d/l songs and songs I converted from cd's. I only use mp3's
because
> wav's
> take up too much space.
>
> robin
>

robingarr324
October 16th, 2003, 09:06 PM
I have d/l trials of other slideshow programs, but
always come back to xatshow. I'm very happy
with this program.

robin